AutoMotorOiler Insta-Lube Kit
Your Subtitle text
AutoMotorOiler-Pre Oil System

 

Have motor oil pressure on your main bearings, rod bearings and camshaft bearings with the Auto Motor Oiler Insta-Lube Kit to prevent motor bearing wear and engine bearing failure.


For all Automobile engines,Industrial engines, Stationary engines, Generator engines, Auto motors, Boat motors, Tractor engines, Truck engines, Diesel engines, Gasoline engines.


You've all heard a lot of numbers thrown around, but it's pretty common knowledge that at least 50% of all engine wear occurs at start-up.


This is due to the fact that the crankshaft drives the oil pump, which pressurizes the lubrication system.


Every time the engine is started, several hundred revolutions of the crankshaft can occur prior to the oil pump pressurizing your industrial engine oil system to lubricate the bearings.


The longer your engine sits without running the dryer the start-up is. After only a few days, all the oil in the galleys and bearings has drained back into the oil pan.


With the Insta-Lube prelube System installed, filtered oil is stored in the accumulator tank ready to pressurize the lubrication system BEFORE the first revolution of the crankshaft.


This completely eliminates all of the wear due to dry bearing abrasion from engine start-up without oil pressure.
 
The accumulator tank is connected to the engine oil gallery with a hydraulic hose where the pressure-sending unit enters the block.

When the engine is running the solenoid valve on the Insta-Lube Kit remains open and the engine oil pump fills and pressurizes the accumulator tank. 

The digital controller closes the solenoid valve when the highest pressure is stored in the accumulator making it ready for your next start up. 


As soon as the ignition key is turned on, the lubrication system will start to pressurize and within a few seconds you will see pressure registering on your engine oil gauge, giving you a fully lubricated engine start. 
 

                          

 

The Insta-Lube Kit would have prevented this "Cold Start" bearing wear!

Insta-Lube Kit

Website Builder